Motorcycle Washing tips

You might think cleaning your bike is as simple as scrubbing with soap & water, but there are few do's and don'ts.

• If the bike is too hot, then don't spray it with water. Water causes the hot metal to lose temperature suddenly and they might damage the metal.
• Do not use high pressure water sprays cause they can seep into the seals of the engine or electrical components

Now the steps to be followed:

1. Rinse the bike thoroughly to loosen the dirt and grime.Use a wet sponge with a mild shampoo to remove the excess dirt stuck on the bike.
2. After washing the bike with the shampoo, rinse the bike thoroughly. any residue of the shampoo can damage the paint.
3. Dry the bike using a microfibre cloth so as to prevent swirl marks. In case of condensation in the headlights, turn on the bike & switch on the lights.
4. Lubricate the chain again to prevent rusting as it would have been washed off when rinsing the bike. Click here if you want to know how to lubricate the chain.
5. The final step is to wax and polish the bike to preserve the clear coat which protects the paint. Read the instructions of the wax before you apply! Application varies from one product to another.
6. Make sure the bike is dry completely before you park it in the garage. Otherwise rusting could take place. 

And you are done!